FLEXIBLE WHIP ANTENNAS



These whip antennas can be used for frequencies in the 30 - 900 MHz range and are recommended for use with small transmitters, pocket scanners, HTs and for other applications where a small antenna is needed. Gain of these antennas is nominally around 0 DB as they are quarter wave types. These antennas have a BNC male base connector. They can be used for transmitters for short range applications in portable work. Note that, as all quarter wave antennas, they need a ground plane to work properly. The metal case used to house the transmitter or receiver may be adequate if it is on the order of a quarter wave or more in size at the operating frequency. These antennas have been tested to work well with the projects that are mentioned for their application.


Whip Antennas
Description
Model

Price USD

Collapsible multi section whip antenna 5 inches to 28 inches fully extended. Has a swivel joint at the base to allow bending the antenna at an angle. This is convienient with scanners and other equipment having horizontally mounted antenna connectors. Useful for scanners and receivers covering the 50-1000 MHz range. Also replaces discontinued NC1490 antenna

  • HEIGHT: 5 to 28 inches
  • CONNECTOR: BNC Male Plug

NC1490

NC1498

14.95

Tuned Rubber Duckie style flexible antenna specially designed for FM Broadcast band application. Helical wound flexible antenna 1/2 inch (12mm) diameter , 9 inches (23 cm) in length with BNC connector.

  • HEIGHT: 9 inches
  • CONNECTOR: BNC Male Plug
NC8892
32.95

Quarter wave flexible omnidirectional whip antenna for use with our ATV Transmitters in the 420-450 MHz range, or VHF-UHF scanners

6.5 inches (15 cm) long, quarter wavelength, 0 dBi gain, for use in the 420 - 450 MHz range
t

  • HEIGHT: 6.5 inches
  • SECTIONS: 1
  • CONNECTOR: BNC Male Plug o
  • This antenna is useful for the following projects:

NC4935
18.00

Quarter wave flexible omnidirectional whip antenna for use with our ATV Transmitters at 902-928 MHz or scanners covering the 800 MHz range

3.1 inches (7.5 cm) long, quarter wavelength, 0 dBi gain, for use in the 902 - 928 MHz range
t

  • HEIGHT: 3.1 inches
  • SECTIONS: 1
  • CONNECTOR: BNC Male Plug
  • This antenna is useful for the following projects:

 

NC9164
18.00
Other frequencies are available on special order. Please call or email for a quote


INDEX| NEXT ITEM| PREVIOUS ITEM | ORDER FORM | HAM LICENSE INFO HOME

 


NORTH COUNTRY RADIO

PO Box 200, Hartford NY 12838-0200

EMAIL: support@northcountryradio.com Tel 518-854-9280 Internet http://www.northcountryradio.com