HARDWARE

This kit contains all the necessary hardware for mounting the kits in one of our cases. Also included are RF, video, and audio connectors, power switch, LED indicator, RF audio and video cables, and wire.

Note: Please specify kit that the the hardware will be used

                                        
         

          For:         All ATV Transmitters, downconverters, LP TV Xmtr 
                       AM88 and MPX96 kits
                       Note: not all parts needed in some applications

          Typical Contents: (may vary slightly depending on application)

                       Red LED and 1K 1/4 watt resistor
                       2.5 mm DC power connector 
                       2.5 mm Plug for DC power
                       SPDT toggle + Nuts
                       BNC female Ch. mtg connector and hardware
                       RCA female Ch. mtg connectors and hardware
                       F connector (if needed)
                       #4 screws, locks as required
                       1/4" x 1/4" 4-40 spacers
                       Shielded audio/video cable
                       #22 hookup wire
                       Miniature 50 ohm coax